Click to enlarge
Bronze Vertical Lift Check Valve (Flanged)
Bronze Vertical Lift Check Valve (Flanged)
Back to products
Cast Iron Horizontal Lift Check Valve Angle Pattern (Flanged)
Cast Iron Horizontal Lift Check Valve Angle Pattern (Flanged)

Cast Iron Horizontal Lift Check Valve Straight Pattern (Flanged)

Salient Features
  • Flanged Ends to DIN 2533 PN 16RF.
  • Straight Pattern, Bolted Cover.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Minimum pressure drop inside the body due to streamlined body design.

Test Pressure (Hydrostatic) :
Shell : 26 kg/cm²g (370 psig)
Working Pressure (Steam) : 13 kg/cm²g (185 psig)
Maximum Working Temperature : 220°C

Category:
Description
Materials
P.No. Name of Part Material of Construction Specification Qty.
1 Body Cast Iron IBR 86-93 Gr. A 1
2 Body Seat Ring Stainless Steel ASTMA 276 Type 410 / ASTMA 182 Gr. F6a 1
3 Disc Ring Stainless Steel ASTMA 276 Type 410 / ASTMA 182 Gr. F6a 1
4 Disc Cast Iron IBR 86-93 Gr. A 1
5 Gasket Steam Jointing Sheet IS 2712 Gr. W/3 1
6 Bonnet Cast Iron IBR 86-93 Gr. A 1
7 Nuts Carbon Steel IS 1367 As Reqd.
8 Studs Carbon Steel IS 1367 As Reqd.
Sizes / Dimensions
Size (Inches) Size (mm) A ±1.5 B ~
1/2 15 130 66
3/4 20 150 70
1 25 160 76
1 1/4 32 180 85
1 1/2 40 200 102
2 50 230 114
2 1/2 65 290 123
3 80 310 140
4 100 350 154
5 125 400 200
6 150 480 230
8* 200 600 275

Related products

Bronze Horizontal Check Valve (Flanged)

Salient Features
  • Flanged Ends to IS 778.
  • Screwed in Bonnet, meant for Horizontal Lines Only.
  • Permits flow in one direction and closes automatically if the flow reverses.
  • Metal Disc is mushroom shaped with spherical seating surface.
  • Disc is guided in Body as well as in Bonnet.
  • Design Standard IS 778, Class-1.
  • Also available with metal to metal seating.
Test Pressure (Hydrostatic) : Shell : 1.5 MPa Seat : 0.25 MPa Maximum Working Temperature : 45°C

Bronze Horizontal Check Valve (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Screwed in Bonnet, meant for Horizontal Lines Only.
  • Permits flow in one direction and shuts automatically if the flow reverses.
  • Metal Disc is mushroom shaped with spherical seating surface.
  • Disc is guided in Body as well as in Bonnet.
  • Design Standard IS 778, Class-1.
  • Also available with metal to metal seating.
Test Pressure (Hydrostatic) : Shell : 1.5 MPa Seat : 0.25 MPa Maximum Working Temperature : 45°C

Bronze Horizontal Lift Check Valve (Flanged)

Salient Features
  • Flanged Ends to BS 10 Table ‘H’.
  • Straight Pattern, Screwed / Bolted Cover.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
Test Pressure (Hydrostatic) : Shell 35.15 kg/cm²g (500 psig) Working Pressure (Steam) : 17.58 kg/cm²g (250 psig) Maximum Working Temperature : 225°C

Bronze Vertical Check Valve (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Single Piece Design, Integral Seat.
  • Meant for Vertical Lines Only.
  • Permits flow in one direction and shuts automatically if the flow reverses.
  • Spring Loaded and ‘O’ Ring Type.
  • Also available with metal to metal seating.
Test Pressure (Hydrostatic) : Shell : 25 kg/cm²g (350 psig) Seat : 16 kg/cm²g (225 psig) Maximum Working Temperature : 80°C

Bronze Vertical Lift Check Valve (Flanged)

Salient Features
  • Flanged Ends to BS 10 Table ‘H’.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Two Piece Design.
Test Pressure (Hydrostatic) : Shell : 35.15 kg/cm²g (500 psig) Working Pressure (Steam) : 17.58 kg/cm²g (250 psig) Maximum Working Temperature : 225°

Cast Iron Non Return Valve PN 1.6 (Flanged)

Salient Features
  • Design Standard IS 5312 – 1 .
  • Flanged Ends to IS 1538.
  • Seating design – Swing Type.
  • Bolted Cover.
  • Renewable Seat with Premium Quality Rubber Flap.
  • Flexible installation (Horizontal / Vertical)
PN 1.6  – Test Pressure (Hydrostatic) : Shell : 2.4 MPa Seat : 1.6 MPa Maximum Working Temperature : 80°C

Forged Brass Multi Utility Check Valve (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Screwed in Bonnet.
  • Suitable for both Horizontal and Vertical Lines.
  • Permits flow in one direction and shuts automatically if the flow reverses.
  • Disc is guided in Body as well as in Bonnet.
  • Chrome Finish.
Test Pressure (Hydrostatic) : Shell : 15 kg/cm²g (220 psig) Seat : 10 kg/cm²g (150 psig) Maximum Working Temperature : 90°C

Forged Steel Horizontal Lift Check Valve, Class-800 (Standard Bore)

Salient Features
  • Design Standard API 602/BS EN ISO 15761 (BS 5352).
  • Body and Cover are Phosphated, to ensure maximum protection from rust.
  • Bolted Cover.
  • Screwed Female Ends to BSPT / NPT / Socket Welded to ANSI B16.11.
Test Pressure (Hydrostatic) : Shell : 207 bar (3000 psig) Seat : 152 bar (2200 psig) Maximum Working Temperature : 425°C