Specifications
Bidirectional Knife Gate Valve – Series 762
Size Range
3” to 48” / 80 mm to 1200 mm
Body Materials
Ductile Iron (3” – 28” / 80 mm – 700 mm)
Carbon Steel (30” – 48” / 750 mm – 1200 mm)
Check with factory for other available materials
Carbon Steel (30” – 48” / 750 mm – 1200 mm)
Check with factory for other available materials
Pressure Ratings
316 SS Gate
3″ – 24″ 100 psi / 80 mm – 600 mm 7 bar
26″ – 42″ 75 psi / 650 mm – 1050 mm 5 bar
44″ – 48″ 50 psi / 1100 mm – 1200 mm 3 bar
(Higher pressures are available with select gate materials)
3″ – 24″ 100 psi / 80 mm – 600 mm 7 bar
26″ – 42″ 75 psi / 650 mm – 1050 mm 5 bar
44″ – 48″ 50 psi / 1100 mm – 1200 mm 3 bar
(Higher pressures are available with select gate materials)
Stem Materials
304 Stainless Steel
Gate Materials
304, 316, 317 Stainless Steel, SAF 2507 Duplex, 17-4PH Stainless Steel, Hastelloy® C, Monel®, Titanium, Duplex 2205
Seat Material Temperature Range
Nat. Rubber: 165°F / 74°C
Buna-N: 194°F / 90°C
EPDM-HT: 302°F / 150°C
Buna-N: 194°F / 90°C
EPDM-HT: 302°F / 150°C
Body Style
Two Piece Bolted – Flanged
Design Standard
Manufacturer Standard
Testing Standard
Manufacturer Standard
Flange Drilling
ASME B16.5 CL150
ASME B16.47 CL150
ASME B16.47 CL150
Certifications
Canadian CRN, PED – Category I Module A (Group 2 Liquids)
Face to Face
Industry Standard
Actuator Options
Direct Mounted Handwheel, Bevel Gear Operator, Double Acting Pneumatic Actuator, Hydraulic Actuator, Electric Actuator
Applications
Mining: Primary Milling, Secondary Milling, Primary Cyclone, Secondary Cyclone, Flotation Cell, Thickener, Filter Pump
HPAL/POX: Autoclave Application Process Pumps
HPAL/POX: Autoclave Application Process Pumps
Features & Benefits
The Bray Series 762 bidirectional heavy duty slurry valve is designed for demanding high pressure slurry applications. Twin elastomer seats and push-through gate design facilitate self-cleaning and prevent media build up.
The durable ductile iron body is offered in a two-piece bolted flange style. When fully open, the valve is full bore, offering no resistance to line media.
Features
- Protective stem cover is standard increasing cycle life in hazardous environments
- Unique J-ring steel-reinforced, elastomer sleeve design provides energized, zero leakage shutoff in both directions. Retaining rings included as standard throughout the entire size range
- In the open position, the energized sleeves shield all metal components from direct contact with the flowing process media
- Robust gate designed for high pressure slurry applications and available in a wide range of corrosion resistant alloys
- Unrestricted flow path with minimal pressure drop achieved through full port valve design for extended sleeve life
- Designed with ample clearance for push-through allowing complete gate closure
- Flanged two-piece bolted body allows for easy maintenance and is drilled and tapped to ASME CL150 flange patterns as standard. Other drilling options available upon request
- Bottom flush plate with tapped ports offered as an option, allowing for safe discharge of media and easy flush water connection