Forged Steel Horizontal Lift Check Valve, Class-800 (Standard Bore)
Salient Features
- Design Standard API 602/BS EN ISO 15761 (BS 5352).
- Body and Cover are Phosphated, to ensure maximum protection from rust.
- Bolted Cover.
- Screwed Female Ends to BSPT / NPT / Socket Welded to ANSI B16.11.
Gate Valve
Special Features
- SAP Gate Valves are heavy duty, outside screw & yoke type, bolted bonnet, rising stem with non rising hand wheel.
- Straight through bore design assures streamlined, minimum turbulence, less erosion, lower pressure drop, & resistance to flow.
- Anti- friction bearings are provided in higher sizes and classes.
- Bi-directional shut-off.
- Deep stuffing box.
- The Seat rings are cylindrical bottom seated type having ample cross section for strength will provided with welded in and threaded Seat-rings will be supplied on request. Integral seat ring provides in SS valves.
- Gate Valves are available in 150#, 300# & 600#.
- Universal trim: 13Cr stem, wedge in CA 15 or 13Cr faced is also available.
- Flexible wedge with low center stem wedge contact, in solid CA15 (13 % Cr) or hard faced with 13% Cr, SS 316, & Monel. Wedge is ground and lapped to a mirror finish and tightly guided to prevent dragging and seat damage, Non-rotating stem with precision Acme threads and burnished finish.
- The two inclined seats allow for tight shut off even against high pressures. Renewable Seat Rings Welded or Threaded.
- Gate Valves are of flexible wedge, outside screw and-yoke and bolted-bonnet construction. The valves confirm to API 600
Globe Valve
Special Features
- SAP Gate Valves are heavy duty, outside screw & yoke type, bolted bonnet, rising stem with non rising hand wheel.
- Straight through bore design assures streamlined, minimum turbulence, less erosion, lower pressure drop, & resistance to flow.
- Anti- friction bearings are provided in higher sizes and classes.
- Bi-directional shut-off.
- Deep stuffing box.
- The Seat rings are cylindrical bottom seated type having ample cross section for strength will provided with welded in and threaded Seat-rings will be supplied on request. Integral seat ring provides in SS valves.
- Gate Valves are available in 150#, 300# & 600#.
- Universal trim: 13Cr stem, wedge in CA 15 or 13Cr faced is also available.
- Flexible wedge with low center stem wedge contact, in solid CA15 (13 % Cr) or hard faced with 13% Cr, SS 316, & Monel. Wedge is ground and lapped to a mirror finish and tightly guided to prevent dragging and seat damage, Non-rotating stem with precision Acme threads and burnished finish.
- The two inclined seats allow for tight shut off even against high pressures. Renewable Seat Rings Welded or Threaded.
- Gate Valves are of flexible wedge, outside screw and-yoke and bolted-bonnet construction. The valves confirm to API 600.
