Show sidebar
Show 9 24 36

Rack and Pinion Pneumatic Actuator Flow-Tek Series 92/93

Output Torque
Up to 44,130 in-lb (4,986 Nm)
Temperature Range
Standard: -4°F to 200°F (-20°C to 93°C) Low: -40°F to 176°F (-40°C to 80°C) High: 0°F to 300°F (-18°C to 149°C) Extreme High: 0°F to 350°F (-18°C to 176°C) 4 hours at 482°F (250°C)
Pressure Ratings
Max Pressure: 140psig (10 Bar)

Scotch Yoke Pneumatic Actuator Series 98

Output Torque
2,744 to 885,100 in-lb (310 to 100,000 Nm)
Temperature Range
-50°F to 300°F (-46°C to 149°C)
Pressure Ratings
40 - 150 psi (2.8 - 10.3 bar)

Electric Actuator Series 70

Output Torque
120/230V: 300 to 18,000 in-lb (34-2034 Nm) 24V: 600 in-lb (68 Nm) 2000 in-lb (226 Nm) 5000 in-lb (565 Nm)
Voltages
120, 230 VAC 50/60 Hz, 1-phase 24V: AC/DC
Enclosure Ratings
NEMA 4, 4X and IP65, IP67

Electric Actuator Series 70-HAZ

Output Torque
800 to 2,000 in-lb (90-226 Nm)
Voltages
120/220 VAC
Enclosure Ratings
Class I, DIV 1 & 2, Group C, D Class II, DIV 1 & 2, Group E, F, G

Manual Operator SRH Series

Power Source
Deadman Handle
Valve Compatibility
¼” – 2” Ball Valves

Manual Operator FTG Series

Output Torque
5,310 to 70,000 lb-in (600 to 7,900 Nm)
Power Source
Manual

Manual Operator Series 01

Output Torque
Resilient seated valves sizes 1”-12” (25mm - 300mm) High pressure valves from 2 1/2”- 8” (65mm - 200mm)
Power Source
Manual Operation
Control Options
Optionally available are an infinite position plate, a 180° notch plate, a memory stop, a padlock kit, and a 2” square nut version

Manual Operator Series 05

Output Torque
2000-36000
Power Source
Manual
Control Options
Manual

Manual Operator Series 04

Output Torque
2000-24000 in-lbs
Power Source
Manual
Control Options
Manual

Manual Operator Chainwheel

Output Torque
Power Source
Manual
Control Options

Gate Valve

Special Features

  • SAP Gate Valves are heavy duty, outside screw & yoke type, bolted bonnet, rising stem with non rising hand wheel.
  • Straight through bore design assures streamlined, minimum turbulence, less erosion, lower pressure drop, & resistance to flow.
  • Anti- friction bearings are provided in higher sizes and classes.
  • Bi-directional shut-off.
  • Deep stuffing box.
  • The Seat rings are cylindrical bottom seated type having ample cross section for strength will provided with welded in and threaded Seat-rings will be supplied on request. Integral seat ring provides in SS valves.
  • Gate Valves are available in 150#, 300# & 600#.
  • Universal trim: 13Cr stem, wedge in CA 15 or 13Cr faced is also available.
  • Flexible wedge with low center stem wedge contact, in solid CA15 (13 % Cr) or hard faced with 13% Cr, SS 316, & Monel. Wedge is ground and lapped to a mirror finish and tightly guided to prevent dragging and seat damage, Non-rotating stem with precision Acme threads and burnished finish.
  • The two inclined seats allow for tight shut off even against high pressures. Renewable Seat Rings Welded or Threaded.
  • Gate Valves are of flexible wedge, outside screw and-yoke and bolted-bonnet construction. The valves confirm to API 600

Globe Valve

Special Features

  • SAP Gate Valves are heavy duty, outside screw & yoke type, bolted bonnet, rising stem with non rising hand wheel.
  • Straight through bore design assures streamlined, minimum turbulence, less erosion, lower pressure drop, & resistance to flow.
  • Anti- friction bearings are provided in higher sizes and classes.
  • Bi-directional shut-off.
  • Deep stuffing box.
  • The Seat rings are cylindrical bottom seated type having ample cross section for strength will provided with welded in and threaded Seat-rings will be supplied on request. Integral seat ring provides in SS valves.
  • Gate Valves are available in 150#, 300# & 600#.
  • Universal trim: 13Cr stem, wedge in CA 15 or 13Cr faced is also available.
  • Flexible wedge with low center stem wedge contact, in solid CA15 (13 % Cr) or hard faced with 13% Cr, SS 316, & Monel. Wedge is ground and lapped to a mirror finish and tightly guided to prevent dragging and seat damage, Non-rotating stem with precision Acme threads and burnished finish.
  • The two inclined seats allow for tight shut off even against high pressures. Renewable Seat Rings Welded or Threaded.
  • Gate Valves are of flexible wedge, outside screw and-yoke and bolted-bonnet construction. The valves confirm to API 600.