Valves

• Standards: : Valve comply with BS 5155, API 609, MSS SP 67 and ISO 5752 valves designed to fit without gaskets between flanges drilled to ANSI 125, DIN. ND 10.16 BS 10 tables D E and F of BS 4505 PN 10/16 tables 6, 7 & 8 of IS : 6418 and tables. 11,15 & 17 of IS : 6392
• Note: : Face to face dimensions given in the installed condition (i.e. with liner compressed) Free length exceeds this dimension by 5 mm max. Depending on valve size. The minimum internal pipe diameter should exceed this dimension for correct installation.
• Technical Data & Specifications : Size Range : 50 to 200 mm Pressure Rating : PN 10 / PN 16 / PN 20 Temp. Rating : Material will be selected according to service.

Bolted Body Construction

• As a standard, the valves are manufactured in 2-piece or 3 Piece bolted body designs, where the joint between the body and the connector is bolted.

Double Block and Bleed

• SAP Trunnion Mounted Ball Valves are designed for upstream sealing, so that the double block and bleed features are automatically built in. The load generated by the line fluid on ball is absorbed by the Trunnion bearings and is directly transmitted to the valve body.
• The valve stem is hence free from any bending load which leads to reduced stem friction torque and enhanced stem seal life. The seat rings are allowed to float in the flow axis against a fixed ball so that the line pressure assists in pressing the spring-loaded upstream seat against the ball. Thus, the operating torque and wear on the seats is relatively low, enhancing seat life.
• The seats provide the positive seal at both upstream and downstream independently. The fluid is blocked from the body cavity; this facilitates to check the integrity of the upstream and downstream seats.