Showing 49–60 of 165 results

Show sidebar
Show 9 24 36

Bronze Needle Valve (Screwed)

Salient Features Screwed Female Ends to IS 554 / BS 21 / ISO 7. Screwed in Bonnet, Inside Screw, Rising

Bronze Parallel Slide Blow Off Valve (Flanged)

Salient Features Flanged Ends to BS 10 Table ‘H’. Maintains fluid tightness and easy in operation because of sliding action of

Bronze Sleeve Packed Water Level Gauge (Flanged)

Salient Features Flanged End to BS 10 Table ‘H’. Automatic Shut Off Device in Water Arm. Set available for both,

Bronze Sleeve Packed Water Level Gauge (Screwed)

Salient Features Screwed Male End to BSP. Automatic Shut Off Device in Water Arm. Set available for both, Right Hand

Bronze Spring Loaded Safety Relief Valve, Enclosed Discharge (Screwed)

Sizes / Dimensions
Size (Inches) Size (mm) A ±1.5 B C ~
1/2 15 33 1/2″ 146
3/4 20 38.5 3/4″ 160
1 25 45 1″ 173
1 1/4 32 45 1 1/4″ 190
1 1/2 40 57 1 1/2″ 220
2 50 57 2″ 240
NOTE : Also available in Metal to Metal contact seating.

Bronze Spring Loaded Safety Relief Valve, Open Discharge (Screwed)

Sizes / Dimensions
Size (Inches) Size (mm) A ~ B
1/2 15 140 1/2″
3/4 20 160 3/4″
1 25 168 1″
1 1/4 32 170 1 1/4″
1 1/2 40 200 1 1/2″
2 50 240 2″

Bronze Thermodynamic Steam Trap (Screwed)

Sizes / Dimensions
Size (Inches) Size (mm) A ±1.5 B ~ C
1/2 15 78 52 1/2″
3/4 20 96 52 3/4″
1 25 120 63 1″

Bronze Union Bonnet Globe Valve (Flanged)

Salient Features
  • Flanged Ends to BS 10 Table ‘F’.
  • Screwed on Bonnet, Rising Stem.
  • Provision for re-packing under pressure.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Handwheel Operated.
Test Pressure (Hydrostatic) : Shell : 35 kg/cm²g (500 psig) Working Pressure (Steam) : 10.55 kg/cm²g (150 psig) Maximum Working Temperature : 225°C

Bronze Union Bonnet Globe Valve (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Screwed on Bonnet, Rising Stem.
  • Provision for re-packing under pressure.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Handwheel Operated.
Test Pressure (Hydrostatic) : Shell : 35 kg/cm²g (500 psig) Working Pressure (Steam) : 10.55 kg/cm²g (150 psig) Maximum Working Temperature : 225°C

Bronze Vertical Check Valve (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Single Piece Design, Integral Seat.
  • Meant for Vertical Lines Only.
  • Permits flow in one direction and shuts automatically if the flow reverses.
  • Spring Loaded and ‘O’ Ring Type.
  • Also available with metal to metal seating.
Test Pressure (Hydrostatic) : Shell : 25 kg/cm²g (350 psig) Seat : 16 kg/cm²g (225 psig) Maximum Working Temperature : 80°C

Bronze Vertical Check Valve (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Single Piece Design.
  • Meant for Vertical Lines Only.
  • Permits flow in one direction and closes automatically if the flow reverses.
  • Design Standard IS 778, Class-1.
  • Also available with metal to metal seating.
Test Pressure (Hydrostatic) : Shell : 1.5 MPa Seat : 0.25 MPa Maximum Working Temperature : 45°C

Bronze Vertical Lift Check Valve (Flanged)

Salient Features
  • Flanged Ends to BS 10 Table ‘H’.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Two Piece Design.
Test Pressure (Hydrostatic) : Shell : 35.15 kg/cm²g (500 psig) Working Pressure (Steam) : 17.58 kg/cm²g (250 psig) Maximum Working Temperature : 225°