Showing 73–84 of 165 results

Show sidebar
Show 9 24 36

Butterfly Valve (Wafer Type), PN 2.5 with S.S 304 Disc – Gear Operated

Salient Features Design Standard IS 13095 / BS EN 593 (BS 5155). Wafer Type. Gear Operated. S.G Iron construction. Stainless

Cast Iron Bucket Type Steam Trap (Screwed)

Sizes / Dimensions
Size (Inches) Size (mm) A ~ B
1/2 15 210 1/2″
3/4 20 210 3/4″
1 25 265 1″
1 1/4 32 372 1 1/4″
1 1/2 40 372 1 1/2″
2 50 412 2″

Cast Iron Double Regulating Balancing Valve (Flanged) With Nozzle

Salient Features Design Standard BS 7350. Precise double regulation. Tamper proof setting. Handwheel Operated. Low noise flow. Can be made

Cast Iron Dual Plate Wafer Type Check Valve, PN 16

Salient Features
  • Design standard API 594.
  • Wafer Type Design, to take lesser space than the conventional Check Valve.
  • Being light in weight, is more rigid than the standard Swing Type Check Valve, which needs expensive foundation and special supports.
  • Being cylindrical body, stresses are uniformly distributed.
  • Much longer seat life because of Bronze / S.S to Rubber contact.
  • Less wear and tear of seat surfaces.
  • End connections are designed to suit flanges drilled to ANSI B Class-125 / ASME B Class-150.
  • Water hammering effect is minimized in this design, since the closing of valve does not depend upon any back pressure or flow.
  • Each plate being half of the size of the swing check valve disc, provides straight flow path offering minimal resistance because of the spring’s assistance as closing of the valve initiates as soon as flow velocity dips below the designated minimum velocity.
Test Pressure (Hydrostatic) : Shell : 24.50 kg/cm²g (350 psig) Seat : 16 kg/cm²g (230 psig) Maximum Working Temperature : 80°C

Cast Iron Globe Steam Stop Valve Angle Pattern (Flanged)

Salient Features
  • Flanged Ends to DIN 2533 PN 16RF.
  • Angle Pattern, Outside Screw, Yoke Type, Rising Stem.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Provision for re-packing under pressure.
  • Minimum pressure drop inside the body due to streamlined body design.
  • High lift of the seat to avoid any obstruction in the flow.
  • Sturdy and comparatively bigger sized wheel provided to give sufficient torque for easy operation.
Test Pressure (Hydrostatic) : Shell : 26 kg/cm²g (370 psig) Working Pressure (Steam) : 13 kg/cm²g (185 psig) Maximum Working Temperature : 220°C

Cast Iron Globe Steam Stop Valve Straight Pattern (Flanged)

  • Flanged Ends to DIN 2533 PN 16RF.
  • Straight Pattern, Outside Screw, Yoke Type, Rising Stem.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Provision for re-packing under pressure.
  • Minimum pressure drop inside the body due to streamlined body design.
  • High lift of the seat to avoid any obstruction in the flow.
  • Sturdy and comparatively bigger sized wheel provided to give sufficient torque for easy operation.
Test Pressure (Hydrostatic) : Shell : 26 kg/cm²g (370 psig) Working Pressure (Steam) : 13 kg/cm²g (185 psig) Maximum Working Temperature : 220°C

Cast Iron Horizontal Lift Check Valve Angle Pattern (Flanged)

Salient Features
  • Flanged Ends to DIN 2533 PN 16RF.
  • Angle Pattern, Bolted Cover.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Minimum pressure drop inside the body due to streamlined body design.
Test Pressure (Hydrostatic) : Shell 26 kg/cm²g (370 psig) Working Pressure (Steam) : 13 kg/cm²g (185 psig) Maximum Working Temperature 220°C

Cast Iron Horizontal Lift Check Valve Straight Pattern (Flanged)

Salient Features
  • Flanged Ends to DIN 2533 PN 16RF.
  • Straight Pattern, Bolted Cover.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Minimum pressure drop inside the body due to streamlined body design.
Test Pressure (Hydrostatic) : Shell : 26 kg/cm²g (370 psig) Working Pressure (Steam) : 13 kg/cm²g (185 psig) Maximum Working Temperature : 220°C

Cast Iron Non Return Valve PN 1.0 (Flanged)

Salient Features
  • Design Standard IS 5312 – 1.
  • Flanged Ends to IS 1538.
  • Seating design – Swing Type.
  • Bolted Cover.
  • Renewable Seat with Premium Quality Rubber Flap.
  • Flexible installation (Horizontal / Vertical)
PN 1.0  – Test Pressure (Hydrostatic) : Shell : 1.5 MPa Seat : 1.0 MPa Maximum Working Temperature : 80°C

Cast Iron Non Return Valve PN 1.6 (Flanged)

Salient Features
  • Design Standard IS 5312 – 1 .
  • Flanged Ends to IS 1538.
  • Seating design – Swing Type.
  • Bolted Cover.
  • Renewable Seat with Premium Quality Rubber Flap.
  • Flexible installation (Horizontal / Vertical)
PN 1.6  – Test Pressure (Hydrostatic) : Shell : 2.4 MPa Seat : 1.6 MPa Maximum Working Temperature : 80°C

Cast Iron Sluice Valve PN 1.0 (Flanged)

Salient Features
  • Design Standard IS 14846 PN 1.0.
  • Bolted Bonnet, Inside Screw, Non-Rising Stem.
  • Rigid and Sturdy design.
  • Handwheel Operated.
  • Flange Ends as per IS 1538.
Test Pressure (Hydrostatic) : Shell  : 1.5 MPa Seat : 1.0 MPa Maximum Working Temperature : 45°C

Cast Iron Sluice Valve PN 1.0 (Flanged) with Rising Stem

Salient Features
  • Design Reference Standard IS 14846.
  • Bolted Bonnet, Outside Screw, Yoke Type, Rising Spindle, Solid Wedge.
  • Rigid and Sturdy design.
  • Hand wheel operated.
  • Flanged ends to IS 1538.
  • Provision of Re-Packing under pressure.
Test Pressure (Hydrostatic) : Shell : 1.5 MPa Seat : 1.0 MPa Maximum Working Temperature : 45°C