Showing 13–23 of 23 results

Show sidebar
Show 9 24 36

Bronze Vertical Lift Check Valve (Flanged)

Salient Features
  • Flanged Ends to BS 10 Table ‘H’.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Two Piece Design.
Test Pressure (Hydrostatic) : Shell : 35.15 kg/cm²g (500 psig) Working Pressure (Steam) : 17.58 kg/cm²g (250 psig) Maximum Working Temperature : 225°

Bronze Vertical Lift Check Valve (Screwed)

Salient Features
  • Screwed Female Ends to BSPT.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Two Piece Design.
Test Pressure (Hydrostatic) : Shell 35.15 kg/cm²g (500 psig) Working Pressure (Steam) : 17.58 kg/cm²g (250 psig) Maximum Working Temperature : 225°C

Cast Iron Dual Plate Wafer Type Check Valve, PN 16

Salient Features
  • Design standard API 594.
  • Wafer Type Design, to take lesser space than the conventional Check Valve.
  • Being light in weight, is more rigid than the standard Swing Type Check Valve, which needs expensive foundation and special supports.
  • Being cylindrical body, stresses are uniformly distributed.
  • Much longer seat life because of Bronze / S.S to Rubber contact.
  • Less wear and tear of seat surfaces.
  • End connections are designed to suit flanges drilled to ANSI B Class-125 / ASME B Class-150.
  • Water hammering effect is minimized in this design, since the closing of valve does not depend upon any back pressure or flow.
  • Each plate being half of the size of the swing check valve disc, provides straight flow path offering minimal resistance because of the spring’s assistance as closing of the valve initiates as soon as flow velocity dips below the designated minimum velocity.
Test Pressure (Hydrostatic) : Shell : 24.50 kg/cm²g (350 psig) Seat : 16 kg/cm²g (230 psig) Maximum Working Temperature : 80°C

Cast Iron Horizontal Lift Check Valve Angle Pattern (Flanged)

Salient Features
  • Flanged Ends to DIN 2533 PN 16RF.
  • Angle Pattern, Bolted Cover.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Minimum pressure drop inside the body due to streamlined body design.
Test Pressure (Hydrostatic) : Shell 26 kg/cm²g (370 psig) Working Pressure (Steam) : 13 kg/cm²g (185 psig) Maximum Working Temperature 220°C

Cast Iron Horizontal Lift Check Valve Straight Pattern (Flanged)

Salient Features
  • Flanged Ends to DIN 2533 PN 16RF.
  • Straight Pattern, Bolted Cover.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Minimum pressure drop inside the body due to streamlined body design.
Test Pressure (Hydrostatic) : Shell : 26 kg/cm²g (370 psig) Working Pressure (Steam) : 13 kg/cm²g (185 psig) Maximum Working Temperature : 220°C

Cast Iron Non Return Valve PN 1.0 (Flanged)

Salient Features
  • Design Standard IS 5312 – 1.
  • Flanged Ends to IS 1538.
  • Seating design – Swing Type.
  • Bolted Cover.
  • Renewable Seat with Premium Quality Rubber Flap.
  • Flexible installation (Horizontal / Vertical)
PN 1.0  – Test Pressure (Hydrostatic) : Shell : 1.5 MPa Seat : 1.0 MPa Maximum Working Temperature : 80°C

Cast Iron Non Return Valve PN 1.6 (Flanged)

Salient Features
  • Design Standard IS 5312 – 1 .
  • Flanged Ends to IS 1538.
  • Seating design – Swing Type.
  • Bolted Cover.
  • Renewable Seat with Premium Quality Rubber Flap.
  • Flexible installation (Horizontal / Vertical)
PN 1.6  – Test Pressure (Hydrostatic) : Shell : 2.4 MPa Seat : 1.6 MPa Maximum Working Temperature : 80°C

Cast Steel Horizontal Lift Check Valve (Flanged)

Salient Features
  • Flanged Ends to DIN 2545 PN 40.
  • Bolted Cover, Straight Pattern.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Minimum pressure drop inside the body due to well contoured body design.
  • Suitable for thermic fluid application also.
Test Pressure (Hydrostatic) : Shell : 60 bar (870 psig) Maximum Working Pressure : 40 bar (580 psig) Maximum Working Temperature : 425°C

Forged Brass Multi Utility Check Valve (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Screwed in Bonnet.
  • Suitable for both Horizontal and Vertical Lines.
  • Permits flow in one direction and shuts automatically if the flow reverses.
  • Disc is guided in Body as well as in Bonnet.
  • Chrome Finish.
Test Pressure (Hydrostatic) : Shell : 15 kg/cm²g (220 psig) Seat : 10 kg/cm²g (150 psig) Maximum Working Temperature : 90°C

Forged Steel Horizontal Lift Check Valve, Class-800 (Full Bore)

Salient Features
  • Design Standard API 602 / BS EN ISO 15761 (BS 5352).
  • Body and Cover are Phosphated, to ensure maximum protection from rust.
  • Bolted Cover.
  • Screwed Female Ends to BSPT / NPT / Socket Welded to ANSI B16.11.
Test Pressure (Hydrostatic) : Shell : 207 bar (3000 psig) Seat : 152 bar (2200 psig) Maximum Working Temperature : 425°

Forged Steel Horizontal Lift Check Valve, Class-800 (Standard Bore)

Salient Features
  • Design Standard API 602/BS EN ISO 15761 (BS 5352).
  • Body and Cover are Phosphated, to ensure maximum protection from rust.
  • Bolted Cover.
  • Screwed Female Ends to BSPT / NPT / Socket Welded to ANSI B16.11.
Test Pressure (Hydrostatic) : Shell : 207 bar (3000 psig) Seat : 152 bar (2200 psig) Maximum Working Temperature : 425°C