Click to enlarge
Bronze Horizontal Check Valve (Screwed)
Bronze Horizontal Check Valve (Screwed)
Back to products
Bronze Horizontal Check Valve No.5 (Screwed)
Bronze Horizontal Check Valve No.5 (Screwed)

Bronze Angle Type Lift Check Valve (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Angle Pattern, Screwed in Bonnet, Integral Seat.
  • Permits flow in one direction and closes automatically if the flow reverses.
  • Metal Disc is mushroom shaped with spherical seating surface.
  • Disc is guided in Body as well as in Bonnet.
  • Medium Pattern.
  • Also available with metal to metal seating.

Test Pressure (Hydrostatic) :
Shell : 24 kg/cm²g (340 psig)
Seat : 16 kg/cm²g (225 psig)
Maximum Working Temperature : 80°C

Category:
Description
Materials
P.No. Name of Part Material of Construction Specification Quantity
1 Body Bronze IS 318 Gr. LTB 2 1
2 Disc Bronze IS 318 Gr. LTB 2 1
3 Bonnet Bronze / Forged Brass IS 318 Gr. LTB 2 / IS 6912 Gr. FLB 1
4 ‘O’ Ring Nitrile Rubber IS 5192 – 1 1
Sizes / Dimensions
Size (Inches) Size (mm) A ~ B ~ C
1/2 15 29 34 1/2″
3/4 20 35 40 3/4″
1 25 43 46 1″
1 1/4 32 47 53 1 1/4″
1 1/2 40 54 61 1 1/2″
2 50 66 70 2″

Related products

Bronze Horizontal Check Valve No.5 (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Screwed in Bonnet, Integral Seat.
  • Permits flow in one direction and closes automatically if the flow reverses.
  • Metal Disc is mushroom shaped with spherical seating surface.
  • Meant for Horizontal Lines Only.
  • Disc is guided in Body as well as in Bonnet.
  • Heavy Pattern.
  • Also available with metal to metal seating.
Test Pressure (Hydrostatic) : Shell : 35 kg/cm²g (500 psig) Seat : 20 kg/cm²g (285 psig) Maximum Working Temperature : 80°C

Bronze Horizontal Check Valve No.8 (Flanged)

Salient Features
  • Flanged Ends to BS 10 Table ‘D’.
  • Screwed in Bonnet, Integral Seat.
  • Permits flow in one direction and shuts automatically if the flow reverses.
  • Metal Disc is mushroom shaped with spherical seating surface.
  • Meant for Horizontal Lines Only.
  • Disc is guided in Body as well as in Bonnet.
  • Medium Pattern.
  • Also available with metal to metal seating.
Test Pressure (Hydrostatic) : Shell : 24 kg/cm²g (340 psig) Seat : 16 kg/cm²g (225 psig) Maximum Working Temperature : 80°C

Bronze Horizontal Lift Check Valve (Flanged)

Salient Features
  • Flanged Ends to BS 10 Table ‘H’.
  • Straight Pattern, Screwed / Bolted Cover.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
Test Pressure (Hydrostatic) : Shell 35.15 kg/cm²g (500 psig) Working Pressure (Steam) : 17.58 kg/cm²g (250 psig) Maximum Working Temperature : 225°C

Bronze Horizontal Lift Check Valve (Screwed)

Salient Features
  • Screwed Female Ends to BSPT.
  • Straight Pattern, Screwed / Bolted Cover.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
Test Pressure (Hydrostatic) : Shell : 35.15 kg/cm²g (500 psig) Working Pressure (Steam) : 17.58 kg/cm²g (250 psig) Maximum Working Temperature : 225°C

Bronze Vertical Check Valve (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Single Piece Design.
  • Meant for Vertical Lines Only.
  • Permits flow in one direction and closes automatically if the flow reverses.
  • Design Standard IS 778, Class-1.
  • Also available with metal to metal seating.
Test Pressure (Hydrostatic) : Shell : 1.5 MPa Seat : 0.25 MPa Maximum Working Temperature : 45°C

Cast Iron Dual Plate Wafer Type Check Valve, PN 16

Salient Features
  • Design standard API 594.
  • Wafer Type Design, to take lesser space than the conventional Check Valve.
  • Being light in weight, is more rigid than the standard Swing Type Check Valve, which needs expensive foundation and special supports.
  • Being cylindrical body, stresses are uniformly distributed.
  • Much longer seat life because of Bronze / S.S to Rubber contact.
  • Less wear and tear of seat surfaces.
  • End connections are designed to suit flanges drilled to ANSI B Class-125 / ASME B Class-150.
  • Water hammering effect is minimized in this design, since the closing of valve does not depend upon any back pressure or flow.
  • Each plate being half of the size of the swing check valve disc, provides straight flow path offering minimal resistance because of the spring’s assistance as closing of the valve initiates as soon as flow velocity dips below the designated minimum velocity.
Test Pressure (Hydrostatic) : Shell : 24.50 kg/cm²g (350 psig) Seat : 16 kg/cm²g (230 psig) Maximum Working Temperature : 80°C

Cast Iron Horizontal Lift Check Valve Straight Pattern (Flanged)

Salient Features
  • Flanged Ends to DIN 2533 PN 16RF.
  • Straight Pattern, Bolted Cover.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Minimum pressure drop inside the body due to streamlined body design.
Test Pressure (Hydrostatic) : Shell : 26 kg/cm²g (370 psig) Working Pressure (Steam) : 13 kg/cm²g (185 psig) Maximum Working Temperature : 220°C

Forged Brass Multi Utility Check Valve (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Screwed in Bonnet.
  • Suitable for both Horizontal and Vertical Lines.
  • Permits flow in one direction and shuts automatically if the flow reverses.
  • Disc is guided in Body as well as in Bonnet.
  • Chrome Finish.
Test Pressure (Hydrostatic) : Shell : 15 kg/cm²g (220 psig) Seat : 10 kg/cm²g (150 psig) Maximum Working Temperature : 90°C