Click to enlarge
Cast Iron Horizontal Lift Check Valve Straight Pattern (Flanged)
Cast Iron Horizontal Lift Check Valve Straight Pattern (Flanged)
Back to products
Cast Steel Horizontal Lift Check Valve (Flanged)
Cast Steel Horizontal Lift Check Valve (Flanged)

Cast Iron Horizontal Lift Check Valve Angle Pattern (Flanged)

Salient Features
  • Flanged Ends to DIN 2533 PN 16RF.
  • Angle Pattern, Bolted Cover.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Minimum pressure drop inside the body due to streamlined body design.

Test Pressure (Hydrostatic) :
Shell 26 kg/cm²g (370 psig)
Working Pressure (Steam) : 13 kg/cm²g (185 psig)
Maximum Working Temperature 220°C

Category:
Description
Materials
P.No. Name of Part Material of Construction Specification Qty.
1 Body Cast Iron IBR 86-93 Gr. A 1
2 Body Seat Ring Stainless Steel ASTMA 276 Type 410 / ASTMA 182 Gr. F6a 1
3 Disc Ring Stainless Steel ASTMA 276 Type 410 / ASTMA 182 Gr. F6a 1
4 Disc Cast Iron IBR 86-93 Gr. A 1
5 Gasket Steam Jointing Sheet IS 2712 Gr. W/3 1
6 Bonnet Cast Iron IBR 86-93 Gr. A 1
7 Nuts Carbon Steel IS 1367 As Reqd.
8 Studs Carbon Steel IS 1367 As Reqd
Sizes / Dimensions
Size (Inches) Size (mm) A ~ B ~
1/2 15 90 54
3/4 20 95 55
1 25 100 58
1 1/4 32 105 66
1 1/2 40 115 78
2 50 125 85
2 1/2 65 145 95
3 80 155 110
4 100 175 125
6 150 225 182
8* 200 275 190

* Pressure and Temperature for 200 mm Valve is as per PN10 and flanges to PN 10RF.

Related products

Bronze Horizontal Check Valve No.5 (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Screwed in Bonnet, Integral Seat.
  • Permits flow in one direction and closes automatically if the flow reverses.
  • Metal Disc is mushroom shaped with spherical seating surface.
  • Meant for Horizontal Lines Only.
  • Disc is guided in Body as well as in Bonnet.
  • Heavy Pattern.
  • Also available with metal to metal seating.
Test Pressure (Hydrostatic) : Shell : 35 kg/cm²g (500 psig) Seat : 20 kg/cm²g (285 psig) Maximum Working Temperature : 80°C

Bronze Horizontal Check Valve No.8 (Flanged)

Salient Features
  • Flanged Ends to BS 10 Table ‘D’.
  • Screwed in Bonnet, Integral Seat.
  • Permits flow in one direction and shuts automatically if the flow reverses.
  • Metal Disc is mushroom shaped with spherical seating surface.
  • Meant for Horizontal Lines Only.
  • Disc is guided in Body as well as in Bonnet.
  • Medium Pattern.
  • Also available with metal to metal seating.
Test Pressure (Hydrostatic) : Shell : 24 kg/cm²g (340 psig) Seat : 16 kg/cm²g (225 psig) Maximum Working Temperature : 80°C

Bronze Horizontal Check Valve No.9 (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Screwed on Bonnet.
  • Permits flow in one direction and closes automatically if the flow reverses.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Metal Disc is mushroom shaped with spherical seating surface.
  • Meant for Horizontal Lines Only.
  • Disc is guided in Bonnet.
Test Pressure (Hydrostatic) : Shell : 35 kg/cm²g (500 psig) Working Pressure (Steam) : 10.55 kg/cm²g (150 psig) Maximum Working Temperature : 225°C

Bronze Vertical Check Valve (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Single Piece Design, Integral Seat.
  • Meant for Vertical Lines Only.
  • Permits flow in one direction and shuts automatically if the flow reverses.
  • Spring Loaded and ‘O’ Ring Type.
  • Also available with metal to metal seating.
Test Pressure (Hydrostatic) : Shell : 25 kg/cm²g (350 psig) Seat : 16 kg/cm²g (225 psig) Maximum Working Temperature : 80°C

Bronze Vertical Check Valve (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Single Piece Design.
  • Meant for Vertical Lines Only.
  • Permits flow in one direction and closes automatically if the flow reverses.
  • Design Standard IS 778, Class-1.
  • Also available with metal to metal seating.
Test Pressure (Hydrostatic) : Shell : 1.5 MPa Seat : 0.25 MPa Maximum Working Temperature : 45°C

Cast Iron Horizontal Lift Check Valve Straight Pattern (Flanged)

Salient Features
  • Flanged Ends to DIN 2533 PN 16RF.
  • Straight Pattern, Bolted Cover.
  • Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
  • Minimum pressure drop inside the body due to streamlined body design.
Test Pressure (Hydrostatic) : Shell : 26 kg/cm²g (370 psig) Working Pressure (Steam) : 13 kg/cm²g (185 psig) Maximum Working Temperature : 220°C

Cast Iron Non Return Valve PN 1.6 (Flanged)

Salient Features
  • Design Standard IS 5312 – 1 .
  • Flanged Ends to IS 1538.
  • Seating design – Swing Type.
  • Bolted Cover.
  • Renewable Seat with Premium Quality Rubber Flap.
  • Flexible installation (Horizontal / Vertical)
PN 1.6  – Test Pressure (Hydrostatic) : Shell : 2.4 MPa Seat : 1.6 MPa Maximum Working Temperature : 80°C

Forged Steel Horizontal Lift Check Valve, Class-800 (Full Bore)

Salient Features
  • Design Standard API 602 / BS EN ISO 15761 (BS 5352).
  • Body and Cover are Phosphated, to ensure maximum protection from rust.
  • Bolted Cover.
  • Screwed Female Ends to BSPT / NPT / Socket Welded to ANSI B16.11.
Test Pressure (Hydrostatic) : Shell : 207 bar (3000 psig) Seat : 152 bar (2200 psig) Maximum Working Temperature : 425°