Show sidebar
Show 9 24 36

Forged Steel Horizontal Lift Check Valve, Class-800 (Full Bore)

Salient Features
  • Design Standard API 602 / BS EN ISO 15761 (BS 5352).
  • Body and Cover are Phosphated, to ensure maximum protection from rust.
  • Bolted Cover.
  • Screwed Female Ends to BSPT / NPT / Socket Welded to ANSI B16.11.
Test Pressure (Hydrostatic) : Shell : 207 bar (3000 psig) Seat : 152 bar (2200 psig) Maximum Working Temperature : 425°

Cast Iron Dual Plate Wafer Type Check Valve, PN 16

Salient Features
  • Design standard API 594.
  • Wafer Type Design, to take lesser space than the conventional Check Valve.
  • Being light in weight, is more rigid than the standard Swing Type Check Valve, which needs expensive foundation and special supports.
  • Being cylindrical body, stresses are uniformly distributed.
  • Much longer seat life because of Bronze / S.S to Rubber contact.
  • Less wear and tear of seat surfaces.
  • End connections are designed to suit flanges drilled to ANSI B Class-125 / ASME B Class-150.
  • Water hammering effect is minimized in this design, since the closing of valve does not depend upon any back pressure or flow.
  • Each plate being half of the size of the swing check valve disc, provides straight flow path offering minimal resistance because of the spring’s assistance as closing of the valve initiates as soon as flow velocity dips below the designated minimum velocity.
Test Pressure (Hydrostatic) : Shell : 24.50 kg/cm²g (350 psig) Seat : 16 kg/cm²g (230 psig) Maximum Working Temperature : 80°C

Cast Iron Non Return Valve PN 1.0 (Flanged)

Salient Features
  • Design Standard IS 5312 – 1.
  • Flanged Ends to IS 1538.
  • Seating design – Swing Type.
  • Bolted Cover.
  • Renewable Seat with Premium Quality Rubber Flap.
  • Flexible installation (Horizontal / Vertical)
PN 1.0  – Test Pressure (Hydrostatic) : Shell : 1.5 MPa Seat : 1.0 MPa Maximum Working Temperature : 80°C

Cast Iron Non Return Valve PN 1.6 (Flanged)

Salient Features
  • Design Standard IS 5312 – 1 .
  • Flanged Ends to IS 1538.
  • Seating design – Swing Type.
  • Bolted Cover.
  • Renewable Seat with Premium Quality Rubber Flap.
  • Flexible installation (Horizontal / Vertical)
PN 1.6  – Test Pressure (Hydrostatic) : Shell : 2.4 MPa Seat : 1.6 MPa Maximum Working Temperature : 80°C

Bronze Ball Valve E-Model (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Full Bore, Two Piece Design.
  • Quarter Turn, Lever Operated.
  • Provided with Stainless Steel Ball.
  • Premium Quality PTFE Gland Packing and Seating.
Test Pressure (Hydrostatic) : Shell : 20 kg/cm²g (285 psig) Seat : 13.5 kg/cm²g (192 psig) Maximum Working Temperature : 220°C

Forged Brass Ball Valve (Screwed)

Salient Features
  • Screwed Female Ends to IS 554 / BS 21 / ISO 7.
  • Full Bore, Two Piece Design.
  • Quarter Turn, Lever Operated.
  • Provided with Forged Brass Hard Chrome Plated Ball.
  • Premium Quality PTFE Gland Packing and Seating.
  • Chrome Finish.
Test Pressure (Hydrostatic) : Shell : 25 kg/cm²g (350 psig) Seat : 16 kg/cm²g (225 psig) Maximum Working Temperature : 220°C

Stainless Steel (CF8M / S.S 316) Three Piece Design Ball Valve, Class-150 (Screwed)

Salient Features
  • Design Standard BS EN ISO 17292 (BS 5351).
  • Screwed Female Ends to BSPT / NPT / Socket Weld.
  • Reduced Bore, Three Piece Design.
  • Superb in Quality and Performance.
Test Pressure (Hydrostatic) : Shell : 31 kg/cm²g (440 psig) Maximum Working Pressure : 21 kg/cm²g (300 psig) Seat (Pneumatic) : 7kg/cm²g (100 psig) Maximum Working Temperature : 220°C

Stainless Steel (CF8M / S.S 316) Three Piece Design Ball Valve, Class-150 (Flanged)

Salient Features
  • Design Standard BS EN ISO 17292 (BS 5351).
  • Flanged Ends to ASME B B16.5 Class – 150 (Drilled).
  • Three Piece Design.
  • Superb in Quality and Performance.
Test Pressure (Hydrostatic) : Shell : 31 kg/cm²g (440 psig) Maximum Working Pressure : 21 kg/cm²g (300 psig) Seat (Pneumatic) : 7 kg/cm²g (100 psig) Maximum Working Temperature : 220°C

Stainless Steel (CF8 / S.S 304) Three Piece Design Ball Valve, Class-150 (Screwed)

Salient Features
  • Design Standard BS EN ISO 17292 (BS 5351).
  • Screwed Female Ends to BSPT / NPT / Socket Weld.
  • Reduced Bore, Three Piece Design.
  • Superb in Quality and Performance.
Test Pressure (Hydrostatic) : Shell : 31 kg/cm²g (440 psig) Maximum Working Pressure : 21 kg/cm²g (300 psig) Seat (Pneumatic) : 7kg/cm²g (100 psig) Maximum Working Temperature : 220°C

Stainless Steel (CF8 / S.S-304) Three Piece Design Ball Valve, Class-150 (Flanged)

Salient Features
  • Design Standard BS EN ISO 17292 (BS 5351).
  • Flanged Ends to ASME B B16.5 Class-150 (Drilled).
  • Three Piece Design.
  • Superb in Quality and Performance.
Test Pressure (Hydrostatic) : Shell : 31 kg/cm²g (440 psig) Maximum Working Pressure : 21 kg/cm²g (300 psig) Seat (Pneumatic) : 7 kg/cm²g (100 psig) Maximum Working Temperature : 220°C

Cast Steel Three Piece Design Ball Valve, Class-150 (Screwed)

Salient Features
  • Design Standard BS EN ISO 17292 (BS 5351).
  • Screwed Female Ends to BSPT / NPT / Socket Weld.
  • Reduced Bore, Three Piece Design.
  • Superb in Quality and Performance.
Test Pressure (Hydrostatic) : Shell : 31 kg/cm²g (440psig) Seat : 21kg/cm²g (300 psig) Seat (Steam) : 10.55 kg/cm²g (150 psig) Maximum Working Temperature : 220°C

Cast Steel Three Piece Design Ball Valve, Class-150 (Flanged)

Salient Features
  • Design Standard BS EN ISO 17292 (BS 5351).
  • Flanged Ends to ANSI B16.5 Class-150 (Drilled).
  • Three Piece Design.
  • Superb in Quality and Performance.
Test Pressure (Hydrostatic) : Shell : 31 kg/cm²g (440 psig) Seat : 21kg/cm²g (30 psig) Seat (Steam) : 10.55 kg/cm²g (150 psig) Maximum Working Temperature : 220°C